Sony RM-VL900 Operating Instructions (primary manual) - Page 3
Features - codes
View all Sony RM-VL900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Features The RM-VL900 Remote Commander provides centralized control of all your AV components from a single remote commander and saves the trouble of operating different AV components with different remote control devices. The following are its main features. Centralized control of Sony AV components with this one remote commander This Commander is preset at the factory to operate Sony brand components, so you can use it out of the box as a control center for your Sony AV components. Remote control signals for non-Sony components are also preset This Commander is preset for most major brands components including Sony. You can remote control your components by setting their code numbers (page 8). Learning function for programming other remote control signals you need This Commander has a Learning function, to "learn" remote control signals to operate non-preset components or functions (page 15). In addition, the Commander can "learn" remote control signals (infrared signals only) of non-Audio Visual components such as air-conditioners, lights, etc. (some specific appliances or functions may not be available) (page 35). Reassigning new components You can assign other Component Select buttons to freely operate other components. This is useful when you have more than two of the same kind of AV components (page 32). System Control function allows one-touch operation to execute a series of commands You can program up to 16 consecutive operation steps to execute a series of operations by pressing a single button (page 23). Data can be transferred between remote commanders with the mark You can transfer the data such as "learned" signals and component code settings between this Commander and another Sony remote commander with the mark. It will save the trouble of performing the same operations again for setting (page 38). Channel Macro function allows you to select a channel with a single key Up to 4 key steps can be programmed on Macro keys. If you set the key operations for entering a channel number on a Macro key, you can select the channel by pressing that Macro key (page 43). 3