Sony SA-NS310 Operating Instructions - Page 36
Updating software, To leave a PARTY, To use the PARTY STREAMING, function with a Network Audio, Remote - software update
View all Sony SA-NS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
When another device (PARTY host) is having a PARTY, press PARTY. The unit joins the PARTY as a PARTY guest and the PARTY STREAMING indicator lights up in amber. To leave a PARTY Press PARTY. The PARTY STREAMING indicator goes off. Notes • An error has occurred when the PARTY STREAMING indicator lights up in red. Perform the process from step 1 again. • The PARTY STREAMING indicator lights up in amber when other devices utilizing the PARTY STREAMING function invite this unit to a PARTY. When you want to leave that PARTY, press PARTY. • You cannot join a PARTY in the following cases: - you have a PARTY on this unit - you have already joined in another PARTY • If you press PARTY when no PARTY is being held, but a device that complies with the PARTY STREAMING function is playing, the device will be the PARTY host and the unit will join the PARTY as a PARTY guest. To use the PARTY STREAMING function with a Network Audio Remote You can use a Network Audio Remote that supports the PARTY STREAMING function to use the unit to start a PARTY that is being held by other devices. Updating software When a new update is available, the UPDATE indicator lights up in green while the unit is connected to the Internet. Check the following customer support website about the update: http://www.sony.net/sans Notes • Perform the following operations after confirm the message and also read and agree the "END-USER LICENSE AGREEMENT FOR SONY SOFTWARE" (page 49). • Make sure you do not attempt any of the following operations while the update is in progress. - Turning the unit off - Connecting or disconnecting the network (LAN) cable (not supplied) - Disconnecting the AC adaptor • About connecting the fixed IP address and setting of the proxy server, display the Setting Screen on a browser and set these referring to "Option 3:Manual setting method using an Access Point Scan (for PC/Mac)" (page 22). 1 Quit all operations before updating. Tip If you do not quit those, the unit will quit or stop all operations automatically. 2 Press and hold the UPDATE button on the side of SA-NS410 or the bottom of SA-NS310 until the illumination is turned off. The update starts. The UPDATE indicator flashes during the update. 36GB