Sony SA-VA10 Operating Instructions - Page 7
Installing, vibration, Choosing, Location
View all Sony SA-VA10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Using the remote You can use the shaded buttons shown below to operate Sony TVs. To turn on a Sony TV operate a Sony TV turn off a Sony TV Press TV POWER the button(s) for the operation you desire. TV POWER Choosing the Best Location To obtain high sound quality and a proper sound image from the front speakers, place the speaker with the built-in operation panel to the left of your TV and the other to the right of your TV so that the center channel tweeters angle towards the center of the room. For the best central sound image, place the left and right speakers within 5 feet of each other and equidistant from the TV. The left and right speakers must be placed standing upright, laying them on their sides will defeat the center channel surround effect. k 5 feet (max) Installing the Anti-vibration pads Spread a towel, or other soft cloth, over a table and lay the speakers down. 2 Peel off the covering sheet from the anti-vibration pad and attach it on the bottom of the speakers (4 for each speaker). \ NI Place the rear speakers so that they fire directly across at each other about 2 to 3 feet above your listening position. 2-3 feet 3 Make sure the anti-vibration pads are securely attached and stand the speaker upright. 7