Sony SA-VA7 Primary User Manual - Page 11

Enjoying Surround Sound Adjusting the Sound Although this speaker system's sound quality is already adjusted, you can change the settings, as you like, for each surround mode individually. The following settings, except the balance, remain stored in their respective surround mode until you change them. BASS +/- - - DJlC J iO = , BALANCE L/R S.WOOFER +1TREBLE +/- 1 Playback a program and choose a surround mode. 2 Make the following sound adjustments according to your preference and the type of program you are watching. To adjust the super woofer level adjust the bass level adjust the treble level adjust the balance press S.WOOFER +/ - BASS +/TREBLE +/BALANCE L/R* • Since BALANCE L and R control sound from the left and right speakers, they have little effect on DOLBY PRO LOGIC when the source software has a high proportion of center-channel sound. To restore the factory settings Press RESET while adjusting the level. Making the adjustment with the main unit Press SELECT to select the sound you wish to adjust. Adjust with the +/- buttons. Pressing SELECT goes through the settings in the following sequence. S. WOOFER LEV (super woofer level) ♦BASS MASTER VOL (volume) ♦ TREBLE If INPUT is set to MIX, then the "MIX BALANCE" indication appears first. Using an External Center Speaker Since this system incorporates a center speaker (see page 4), you do not have to connect a center speaker. However, it is possible to connect a center speaker, it vou already have one, to the EXT CENTER SI' terminal. Be sure to use a speaker with a 8 to IS ohm impedance tor the center speaker. left speaker center speaker (optional) 00 2 O°O R L Speaker connecting cord Monaural mini-plug Consult your dealer about the speaker cord you require. When you plug the external speaker cord into the EXT CENTER SP jack on the left speaker, the built-in center speakers are muted, and the center channel is output from the external speaker. lit