Sony SAT-B65 Operating Instructions - Page 18
Connecting a home, entertainment, system - remote code
View all Sony SAT-B65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
8. Remove the temporary mounting tape. Attach the emitter permanently with peel-and-stick backing. This will not interfere with normal VCR operation. The VCR SETUP menu provides the settings to allow the DIRECTV Receiver to communicate with your VCR. VCR SETUP Install Signal VCR Prefs Test New Card Upgrade Features Exit Return Thu, Aug 2 2:22 PM Brand Admiral Aiwal Akai Audio Dynamics Bell & Howell Brooksonic Canon Code 1 2 3 4 5 Select a code Test Record Stop Clear 9. Scroll through the VCR brands using the navgation buttons. If you cannot find the correct code listed for your brand of VCR, try related brands that use the same code. Your VCR may also respond to multiple codes. 10. Use the remote control SELECT button to try each code. 11. Alternate between this procedure and testing the code. Test the VCR This Record/Stop test verifies the specified brand and code controls your VCR. (Record/Stop) Before starting the test: (SAT-A65 only) • Turn the VCR power on. • Verify the VCR Control Cable is properly connected. • Insert a recordable videotape into the VCR. Signals coming from the remote control at the same time as signals coming from the VCR Control cable may provide unreliable test results. Use the DIRECTV Receiver front panel controls, rather than the remote control, to test the codes. Test the VCR record and stop commands, If either command does not function, try other codes shown for your VCR brand. If you are unsuccessful after trying all available codes, recheck your VCR Control Cable connections and IR emitter placement. Connecting a home entertainment system The A/V receiver must be turned on in order to send the video signal to your TV. You can integrate the DIRECTV Receiver into your entertainment system to take advantage of enhanced audio and video capability. Follow these instructions to connect your DIRECTV Receiver. • To connect the DIRECTV Receiver to your audio system, use A/V cables to connect the satellite receiver to the audio receiver's AUDIO IN jacks. • Dolby Digital - With the SAT-A65 model, you can enjoy programs that contain a Dolby Digital sound track. We recommend that you listen in surround sound for maximum enjoyment of these programs. You can connect the stereo outputs of the SAT-A65 to a receiver that contains a Adding system components 9