Sony SCD-CE775 Operating Instructions - Page 5

Getting Started Notes • When you make the Multi-channel connection, connect the ANALOG 2CH OUT jacks also using another audio connecting cord ( not supplied) so that you can play a CD (or SACD) when you set the input selector of your amplifier to CD (or SACD) input . • During playback of a conventional CD or a 2CH Super Audio CD, the same signal that is output from the ANALOG 2CH OUT jacks is also output from the ANALOG 5.1CH FRONT L/ R jacks. • During playback of a Multi-channel Super Audio CD, the same signal that is output from the ANALOG 5.1CH FRONT L/R jacks is also output from the ANALOG 2CH OUT jacks. (The down mixed signal of the Multi-channel signal is not played back.) • There are 5CH, 4CH, and 3CH Super Audio CD. When you play these disc, the signal does not output from all the jacks of the ANALOG 5.1CH OUT. For details of the playback, see the cover or instructions of the Super Audio CD. Connecting via ANALOG 2CH OUT jacks Use an audio connecting cords for this connection. Connect the ANALOG 2CH OUT L/R jacks to the CD (SACD) input jacks of your amplifier. Be sure to match the color-coded pin to the appropriate jacks: white (left) to white and red (right) to red. Audio connecting cords (Red and White) (not supplied*) White (L) Red (R) White (L) Red (R) * If you do not make the ANALOG 5.1 CH connection (page 4), you can use the supplied audio connecting cable for the ANALOG 2CH connection. L CENTER L R 2CH OUT R SUB FRONT SURR WOOFER 5.1CH OUT ANALOG OPTICAL OUT DIGITAL (CD) CONTROL A1ΙΙ To CD (SACD) IN jacks (L/R) Stereo amplifier, etc. 5