Sony SDM-HS73P Operating Instructions - Page 12
Adjusting the picture's sharpness, and centering SCREEN - monitor
View all Sony SDM-HS73P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Adjusting the picture's sharpness and centering (SCREEN) x Automatic picture quality adjustment function When the monitor receives an input signal, it automatically adjusts the picture's position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 15). Note While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate. If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO below.) If you still need to make further adjustments to the picture quality You can manually adjust the picture's sharpness (phase/pitch) and position (horizontal/vertical position). These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer. x Make further automatic adjustments to the picture quality for the current input signal (AUTO) 1 Press the MENU button. The main menu appears on the screen. 2 Press the M/m buttons to select (SCREEN) and press the OK button. The SCREEN menu appears on the screen. 3 Press the M/m buttons to select AUTO and press the OK button. Make the appropriate adjustments of the screen's phase, pitch and horizontal/vertical position for the current input signal and store them. 4 Press the M/m buttons to select button. Return to the menu screen. and press the OK x Adjust the picture's sharpness manually (PHASE/PITCH) You can adjust the picture's sharpness as follows. 1 Set the resolution to 1024 × 768 (SDM-HS53) 1280 × 1024 (SDM-HS73/HS93) on the computer. 2 Load the Utility Disk. 3 Start the Utility Disk and display the test pattern. For Windows Click [Utility] t [Windows]/[Win Utility.exe]. For Macintosh Click [Utility] t [Mac]/[Mac Utility]. 4 Press the MENU button. The main menu appears on the screen. 5 Press the M/m buttons to select (SCREEN) and press the OK button. The SCREEN menu appears on the screen. 6 Press the M/m buttons to select PHASE and press the OK button. The PHASE menu appears on the screen. 7 Press the M/m buttons until the horizontal stripes are at a minimum. Adjust so that the horizontal stripes are at a minimum. 8 Press the OK button. Return to the SCREEN menu. If vertical stripes are observed over the entire screen, adjust pitch by the following steps. 9 Press the M/m buttons to select PITCH and press the OK button. The PITCH menu appears on the screen. 10 Press the M/m buttons until the vertical stripes disappear. Adjust so that the vertical stripes disappear. 11 Click [END] on the screen to turn off the test pattern. 12 Press the OK button. Return to the SCREEN menu. 13 Press the M/m buttons to select button. Return to the menu screen. and press the OK 12