Sony SDM-HS75PB Operating Instructions - Page 13

x Adjust the picture's sharpness manually (Phase/Pitch) You can adjust the picture's sharpness as follows. This adjustment is effective when the computer is connected to the monitor's HD15 input connector (analog RGB). 1 Set the resolution to 1280 × 1024 on the computer. 2 Load the CD-ROM. 3 Start the CD-ROM, select the area and model, and display the test pattern. For Windows Click [Utility] t [Windows]/[Win Utility.exe]. For Macintosh Click [Utility] t [Mac]/[Mac Utility]. 4 Press the MENU button. The main menu appears on the screen. 5 Press the m/M buttons to select (SCREEN) and press the OK button. The SCREEN menu appears on the screen. 6 Press the m/M buttons to select "PHASE" and press the OK button. The "PHASE" adjustment menu appears on the screen. 7 Press the m/M buttons until the horizontal stripes are at a minimum. Adjust so that the horizontal stripes are at a minimum. 8 Press the OK button. The main menu appears on the screen. If vertical stripes are observed over the entire screen, adjust the pitch using the following procedures. 9 Press the m/M buttons to select "PITCH" and press the OK button. The "PITCH" adjustment menu appears on the screen. 10 Press the m/M buttons until the vertical stripes disappear. Adjust so that the vertical stripes disappear. 11 Click [END] on the screen to turn off the test pattern. x Adjust the picture's position manually (H CENTER /V CENTER) If the picture is not in the center of the screen, adjust the picture's centering as follows. 1 Set the resolution to 1280 × 1024 on the computer. 2 Load the CD-ROM. 3 Start the CD-ROM, select the area and model, and display the test pattern. For Windows Click [Utility] t [Windows]/[Win Utility.exe]. For Macintosh Click [Utility] t [Mac]/[Mac Utility]. 4 Press the MENU button. The main menu appears on the screen. 5 Press the m/M buttons to select press the OK button. (SCREEN) and The SCREEN menu appears on the screen. 6 Press the m/M buttons to select "H CENTER" or "V CENTER" and press the OK button. The "H CENTER" adjustment menu or "V CENTER" adjustment menu appears on the screen. 7 Press the m/M buttons to center the test pattern on the screen. GB 8 Click [END] on the screen to turn off the test pattern. MENU POSITION menu You can change the menu position if it is blocking an image on the screen. MENU POS I T I ON 1280 x1024 / 60Hz EX I T 1 Press the MENU button. The main menu appears on the screen. 2 Press the m/M buttons to select (MENU POSITION) and press the OK button. The "MENU POSITION" menu appears on the screen. 3 Press the m/M buttons to select the desired position and press the OK button. You can choose one of 9 positions where the menu will appear. 13