Sony SDM-HS75PB Quick Setup Guide - Page 6

Symptom If OUT OF RANGE appears on the screen, If you are using Windows and replaced an old monitor with this monitor, Check these items x Problems caused by a computer or other equipment connected, and not caused by the monitor • Check that the video frequency range is within that specified for the monitor. If you replaced an old monitor with this monitor, reconnect the old monitor and adjust the computer's graphics board within the following ranges: Horizontal: 28-80 kHz (analog RGB), 28-64 kHz (digital RGB) Vertical: 48-75 Hz (analog RGB), 60 Hz (digital RGB) Resolution: 1280 × 1024 or less • If you replaced an old monitor with this monitor, reconnect the old monitor and do the following. Select "SONY" from the "Manufacturers" list and select "SDM-HS75P" or "SDM-HS95P" from the "Models" list in the Windows device selection screen. If the model name of this monitor does not appear in the "Models" list, try "Plug & Play." Displaying this monitor's information While the monitor is receiving a video signal, press and hold the MENU button for more than 5 seconds until the information box appears. Press the MENU button again to make the box disappear. MENU • Model name: SDM-HS75P or SDMHS95P • Serial number • Detailed description of the problem • Date of purchase • Name and specifications of your computer and graphics board Example INFORMATION 1 MODEL : SDM-HS75P SER . NO : 1234567 2 MANUFACTURED : 2004-52 3 1Model name 2Serial number 3Week and year of manufacture If any problem persists, call your authorized Sony dealer and give the following information: 6 (US)