Sony SDM-HS94P/S Quick Setup Guide - Page 3

Setup Unpacking Make sure your carton contains everything listed below. • LCD display • Power cord • HD15-HD15 video signal cable (analog RGB) • DVI-D video signal cable (digital RGB) • Cord strap • CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.) • Warranty card • This Quick Setup Guide Connecting your monitor Connect your monitor to a computer or other equipment. • Turn off the monitor, computer, and any other equipment before connecting them. • Do not touch the pins of the video signal cable plug. 1 Remove the back cover. 2 Connect your monitor to a computer. Connecting a Macintosh computer Connect the supplied video signal cable to a video output connector on the computer. If necessary, use an adapter (not supplied). Connect the adapter to the computer before connecting the video signal cable. 3 Connect the supplied power cord to the monitor's AC IN connector. 4 Connect the power cord to a power outlet. 1 back cover to the DVI-D input connector (digital RGB) INPUT 1 DVI-D to the HD15 input connector (analog RGB) INPUT 2 HD-15 DVI-D video signal cable (digital RGB) (supplied) 2 HD15-HD15 video signal cable (analog RGB) (supplied) to power outlet 4 3 power cord to AC IN (supplied) Note For details on securing the cords, refer to the Operating Instructions on the CD-ROM. US Turning on the monitor and computer Turn on your monitor first, then a computer. 1 Press upward the 1 (power) switch on the front right of the monitor. The 1 (power) indicator lights up in green. INPUT OK MENU lights in green 2 Turn on the computer. 3 (US)