Sony SDM-S204 Quick Setup Guide - Page 3

Connecting your monitor Connect your monitor to a computer or other equipment. • Turn off the monitor, computer, and any other equipment before connecting them. • Do not touch the pins of the video signal cable plug. 1 Slide up the back cover. 2 Tilt the display forward. 3 Connect your monitor to a computer. Connecting a Macintosh computer Connect the supplied video signal cable to a video output connector on the computer. If necessary, use an adapter (not supplied). Connect the adapter to the computer before connecting the video signal cable. 4 Connect the supplied power cord securely to the monitor's AC IN connector. 5 Connect the other end securely to a power outlet. back cover 1 2 Turning on the monitor and computer Turn on your monitor first, then a computer. 1 Press the MAIN POWER switch on the right side of the monitor in the direction of the [, if it is not already pressed. Make sure the 1 (power) indicator is lit in red. Note The default setting of the MAIN POWER switch is in the direction of the [. 2 Press the 1 (power) switch on the front right of the monitor. The 1 (power) indicator lights up in green. US 3 Turn on the computer. MAIN POWER 1 to the HD15 input to the DVI-D input connector (analog RGB) connector (digital RGB) INPUT 1 INPUT 2 INPUT 3 2 HD-15 HD-15 DVI-D HD15-HD15 video signal cable (analog RGB) (supplied) 3 DVI-D video signal cable (digital RGB) (supplied) 4 to AC IN to power outlet 5 power cord (supplied) Note For bundling the cords and cables, refer to the Operating Instructions on the supplied CD-ROM. No need for specific drivers The monitor complies with the "DDC" Plug & Play standard and automatically detects all the monitor's information. No specific driver needs to be installed on the computer. 3 (US)