Sony SDM-X53 Operating Instructions - Page 8
Setup - 15 lcd monitor
UPC - 027242632868
View all Sony SDM-X53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setup Before using your monitor, check that the following items are included in your carton: • LCD display • Power cord • HD15-HD15 video signal cable (analog RGB) • DVI-D video signal cable (digital RGB) • Audio cord (stereo miniplug) • CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.) • Warranty card • Quick Setup Guide Setup 1: Connect the video signal cables • Turn off the monitor and computer before connecting them. • When connecting the computer to the monitor's HD15 input connector (analog RGB), refer to "Connect a computer equipped with an HD15 output connector (analog RGB)." Note Do not touch the pins of the video signal cable connector as this might bend the pins. 1 Slide up the back cover. 2 Tilt the display forward. Connect a computer equipped with a DVI output connector (digital RGB) Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the monitor's DVI-D input connector (digital RGB) for INPUT2 (SDM-X53) or INPUT3 (SDM-X73/X93). to the DVI-D input connector (digital RGB) to the computer's DVI output connector (digital RGB) DVI-D video signal cable (digital RGB) (supplied) Connect a computer equipped with an HD15 output connector (analog RGB) Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor's HD 15 input connector (analog RGB) for INPUT1 or INPUT2 (SDM-X73/X93). Connect the computer according to the following illustrations. x Connecting to an IBM PC/AT or compatible computer GB to the HD 15 input connector (analog RGB) IBM PC/AT or compatible computer to the computer's HD15 output connector (analog RGB) IBM PC/AT or compatible computer HD15-HD15 video signal cable (analog RGB) (supplied) (continued) 7