Sony SDX550V User Guide - Page 17
Attaching and Removing the Dust Cover, Attaching the Dust Cover
View all Sony SDX550V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Attaching and Removing the Dust Cover Attaching the Dust Cover 1 Align the dust cover's hinge clips (one on each side) with the pins of the drive bezel. • The dust cover should be positioned so that the magnets* on the cover's back face the drive bezel. * This magnet does not affect the tape of the cartridge. • Holding the dust cover at an angle as shown in the figure below, set the hinge clips on top of the bezel pins, positioning them so that they bracket the pins. 17
17
Attaching and Removing the Dust
Cover
Attaching the Dust Cover
1
Align the dust cover’s hinge clips (one on each side) with the
pins of the drive bezel.
•
The dust cover should be positioned so that the magnets
*
on the cover’s back face the drive bezel.
*
This magnet does not affect the tape of the cartridge.
•
Holding the dust cover at an angle as shown in the figure below,
set the hinge clips on top of the bezel pins, positioning them so that
they bracket the pins.