Sony SHAKE-55 Operating Instructions - Page 30

Creating your own sound effect You can raise or lower the levels of specific frequency bands, then store the setting in the memory as "CUSTOM EQ". 1 Press OPTIONS on the unit. 2 Press / repeatedly to select "EQ EDIT", then press . 3 Press / repeatedly to adjust the equalizer level, then press . Frequency band Equalizer level 4 Repeat step 3 to adjust the level of other frequency bands and surround effect. To exit the options menu, press OPTIONS on the unit. To select the custom equalizer setting Press MUSIC repeatedly to select "CUSTOM EQ". Creating a party atmosphere (DJ EFFECT) 1 Press the following button to select the effect type. The selected button lights up and the effect is activated. • FLANGER: Create a deep flanging effect that is similar to the roar of a jet plane. • ISOLATOR: Isolate a specific frequency band by adjusting the other frequency bands. For example, when you want to focus on vocals. • PAN: Create a feeling that the sound is moving around the speakers between left and right channels. • WAH: Create a special effect of "Wah-wah" sound by moving the frequency of a filter up and down automatically. 2 Press DJ CONTROL +/- to adjust the effect level. To turn off the effect Press the selected effect button again. Notes • The DJ EFFECT is automatically turned off when you turn off the system or change the function or tuner band. • If you activate the DJ EFFECT during transfer, the sound effect will not be transferred to the USB device. • You cannot use VOLUME/DJ CONTROL on the unit to adjust the volume when the DJ EFFECT is activated. Press VOLUME +/- on the remote control to adjust the volume. 30GB