Sony SHAKE-X30 Operating Instructions - Page 42
Speakers, Disc player, PLEASE CONNECT ALL SPK
View all Sony SHAKE-X30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
The remote control does not function. •• Remove the obstacles between the remote control and the unit. •• Move the remote control closer to the unit. •• Point the remote control at the unit's sensor (page 17). •• Replace the batteries (R03/size AAA). •• Move the unit away from the fluorescent light. There is acoustic feedback. •• Reduce the volume. •• Move the microphone and guitar away from the system or change the direction of the microphone. "PLEASE CONNECT ALL SPK" appears. •• Check that all speakers are connected. "CHILD LOCK" appears when you press any button on the unit. •• Set the Child Lock function to off (page 39). A clicking sound is heard when turning the power on. •• This is the operating sound and it occurs when the power is turned on or off, for example. This is not a malfunction. Speakers Sound comes from only one channel or the left and right volume is unbalanced. •• Place the speakers as symmetrically as possible. •• Check that the speakers are connected securely and correctly. •• The source being played back is monaural. 42US There is no sound from a specific speaker. •• Check that the speaker is connected securely and correctly. Disc player The disc tray does not open and "LOCKED" appears on the display. •• Consult your nearest Sony dealer or local authorized Sony service facility. The disc tray does not close. •• Load the disc correctly. The disc does not eject. •• You cannot eject the disc during Synchronized Transfer or REC1 Transfer. Press to cancel the transfer, then press on the unit to eject the disc. •• Consult your nearest Sony dealer. Playback does not start. •• Wipe the disc clean (page 47). •• Reload the disc. •• Load the disc that this system can play back (page 8). •• Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. The sound skips. •• Wipe the disc clean (page 47). •• Reload the disc. •• Move the unit to a place with no vibration. •• Move the speakers away from the unit. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip.