Sony SHAKE5 Operating Instructions - Page 21

Bluetooth 4 Perform the pairing procedure on the Bluetooth device. For details, refer to the operating instructions of your Bluetooth device. 5 Select the model number of the unit on the display of the Bluetooth device. For example, select "SONY:SHAKE-5". If passkey is required on the Bluetooth device, enter "0000". 6 Perform the Bluetooth connection on the Bluetooth device. When pairing is completed and the Bluetooth connection is established, Bluetooth device name appears in the display panel. Depending on the Bluetooth device, connection may start automatically after pairing is completed. You can check the Bluetooth device address by pressing DISPLAY repeatedly. Notes • You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one. • "Passkey" may be called "Passcode", "PIN code", "PIN number" or "Password", etc., depending on the device. • The pairing standby status of the system is canceled after about 5 minutes. If pairing is not successful, repeat from step 1. • While connected to a Bluetooth device, this system cannot be detected and connection cannot be established from another Bluetooth device which is never paired before. • If you want to pair with another Bluetooth device, repeat steps 1 to 6. To cancel pairing operation Hold down BLUETOOTH on the unit for 2 seconds or more until "BLUETOOTH" appears in the display panel. Connecting with a smartphone by one touch (NFC) By touching the system with an NFCcompatible smartphone, the system is turned on in Bluetooth function automatically, and then proceeds to complete pairing and the Bluetooth connection automatically. What is "NFC"? NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the designated touchpoint on the NFC-compatible devices. 1 Download and install the app "NFC Easy Connect". Download the free Android app from Google Play by searching for "NFC Easy Connect" or access it by using the two-dimensional code below. Data communication fees may be charged. Two-dimensional code* for direct access * Use a two-dimensional code reader app. Notes • The app may not be available in some countries/regions. • Depending on your smartphone, you can use the NFC function without installing the app. In this case, the operations and specifications may be different. For details, refer to the operating instructions of your smartphone. 21GB