Sony SLV-495 Operating Instructions primary manual - Page 58
Operation, recording
View all Sony SLV-495 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Editing with another VCR (continued) Operation (when recording on this VCR) Before you start editing • Turn on your TV and set it to the video channel. • Press INPUT SELECT on the remote @ commander to display "Ll" or "L2" in the display window. • Press TAPE SPEED on the remote commander to select the tape speed, SP or EP. 0 -I= II PAUSE • REC 1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause. 2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press II PAUSE. 3 Press • REC on this VCR and set it to recording pause. 4 To start editing, press the II PAUSE buttons on both VCRs at the same time. To stop editing Press the ■ STOP buttons on both VCRs. Note • If you start recording following the procedure above, the VCR won't start recording with the-APC-function. To record a tape with the APC function, press • REC again during recording pause in step 3 so that the VCR analyzes the tape. Then when you start recording in step 4, press II PAUSE immediately after the APC indicator stops flashing. If you press II PAUSE before the APC indicator stops flashing, the APC function is canceled. 58 I Additional Operations