Sony SLV-660HF Primary User Manual - Page 37
Editing, another
View all Sony SLV-660HF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
• Editing with another VCR How to hook up to record on this VCR This VCR (Recorder) VMC-810 audio/video cable a (;) LINE IN Signal flow Other VCR (Player) O LINE OUT Operation (when recording on this VCR) Before you start editing • Turn on your TV and set it to the video channel. • Press CH +/- to display "L" in the display window. • Press TAPE SPEED on the remote commander to select the tape speed, SP or EP. II PAUSE • REC V 1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause. 2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press II PAUSE. 3 Press • REC on this VCR-and set it to recording pause. 4 To start editing, press the II PAUSE buttons on both VCRs at the same time. To stop editing Press the ■ STOP buttons on both VCRs. Notes • Make sure you connect the plugs to jacks of the same color. • If the other VCR is a monaural type, use a connecting cable, such as VMC-910MS. • If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise. • If you start recording following the procedure above, the VCR won't start recording with the APC function. To record a tape with the APC function, press • REC again during recording pause in step 3 so that the VCR analyzes the tape. Then when you start recording in step 4, press II PAUSE immediately after the APC indicator stops flashing. If you press II PAUSE before the APC indicator stops flashing, the APC function is canceled. 37