Sony SLV-N80 Operating Instructions - Page 6
Controlling other TVs and/or AV receivers with the remote, commander - remote control
View all Sony SLV-N80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Notes • With normal use, the batteries should last about three to six months. • If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery with an old one. • Do not use different types of batteries. • You do not need to move the [TV] / [VIDEO] switch when operating your AV receiver. • Some Sony AV receivers may not operate with this remote commander. Controlling other TVs and/or AV receivers with the remote commander The remote commander is preprogrammed to control non-Sony TVs and/or AV receivers. If your TV and/or AV receiver is listed in the following table, set the appropriate manufacturer's code number. 1 Set [TV] / [VIDEO] at the top of the remote commander to [TV]. 2 Hold down ?/1, and enter your TV's code number using the number buttons. Then release ?/1. 3 Next, hold down ?/1, and enter your AV receiver's code number using the number buttons. Then release ?/1. Now you can use the ?/1, VOL +/-, CH +/-, and TV/VIDEO buttons to control your TV. You can also use the buttons marked with a dot (•) to control a Sony TV. You can use the RECEIVER VOL +/- and MUTING buttons to control your AV receiver. To control the VCR, reset [TV] / [VIDEO] to [VIDEO]. 6 Setting up the remote commander