Sony SLV-N81 Operating Instructions - Page 97
Attaching the external antenna connector, Attaching a UHF/VHF band mixer, Additional Information
![]() |
UPC - 027242583504
View all Sony SLV-N81 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Attaching the external antenna connector When using a 300-ohm twin lead cable for a VHF/UHF antenna, use the EAC-32 antenna connector (not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable EAC-32 antenna connector (not supplied) 1 Loosen the screws on the antenna connector. 2 Wind the twin leads around the screws on the antenna connector. 3 Retighten the screws. Attaching a UHF/VHF band mixer When using both a 75-ohm coaxial cable and a 300-ohm twin lead cable for a VHF/UHF antenna, use the EAC-66 UHF/VHF band separator/mixer (not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable EAC-66 UHF/VHF band separator/ mixer (not supplied) 75-ohm coaxial cable 1 Loosen the screws on the mixer. 2 Wind the twin leads around the screws on the mixer. 3 Retighten the screws. 4 Connect the 75-ohm coaxial cable to the mixer. Additional Information General setup information 97
![](/manual_guide/products/sony-slvn81-operating-instructions-ecec30d/97.png)