Sony SMP-N100 Operating Instructions - Page 25
BRAVIA Sync Control for, Others, work BRAVIA Sync.
UPC - 027242800205
View all Sony SMP-N100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
The desired wireless router is not detected even if "Scan" is performed. , Press RETURN to return to the previous screen, and try "Scan" again. If the desired wireless router is still not detected, press RETURN to select "Manual registration." The message "A new software version has been found on the network. Perform update under "Network Update."" appears on the screen when turning the player on. , See "Network Update" (page 18) to update the player to a newer software version. BRAVIA Sync ("Control for HDMI") The "Control for HDMI" function does not work (BRAVIA Sync). , Check that "Control for HDMI" is set to "On" (page 21). , If you change the HDMI connection, turn the player off and on again. , If power failure occurs, set "Control for HDMI" to "Off," then set "Control for HDMI" to "On" (page 21). , Check the following and refer to the instruction manual supplied with the component. - the connected component is compatible with the "Control for HDMI" function. - the connected component's setting for the "Control for HDMI" function is correct. , When you connect the player to a TV through an AV amplifier (receiver), - if the AV amplifier (receiver) is not compatible with the "Control for HDMI" function, you may be unable to control the TV from the player. - if you change the HDMI connection, disconnect and reconnect the AC power cord, or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set "Control for HDMI" to "Off," then set "Control for HDMI" to "On" (page 21). Refer to the instruction manual supplied with the AV amplifier (receiver). Others Playback does not start from the beginning of content. , Press OPTIONS, and select "Play from beginning." Playback does not start from the resume point where you last stopped playing. , The resume point may be cleared from memory when - you disconnect the USB device. - you play other content. - you turn off the player. The player does not respond to any button. , Hold down [/1 on the player for more than 10 seconds until the indicators on the front panel turn off. If the player still does not respond to any button, disconnect then reconnect the AC power cord. 25 Additional Information