Sony SMPU10 Operating Instructions - Page 28
Additional Information, Troubleshooting, Power, Picture and sound, Operation - ntfs
UPC - 027242775985
View all Sony SMPU10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Additional Information Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power does not turn on. , Check that the power cord is connected securely. Picture and sound There is no picture and no sound. , Re-connect the connecting cable securely. , The connecting cables are damaged. , Check the connection to your TV (page 9) and switch the input selector on your TV so that the signal from the player appears on the TV screen. , Press [/1 to turn off the player, and enter "369" using the number buttons on the remote, then press [/1 to turn on the player again (page 26). There is no picture/picture noise appears when connected to the HDMI OUT jack. , Try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then connect the HDMI cord again. Operation The remote does not function. , The batteries in the remote are weak. , The remote is not pointed at the remote sensor on the player. The player does not detect a USB device connected to the player. , The USB device is not securely connected to the player (page 15). , The USB device or a cable is damaged. , Compatibility with all encoding/writing softwares, recording devices, and recording media cannot be guaranteed. Incompatible USB device may produce noise or interrupted audio or may not play at all. , This player supports FAT32 format, not NTFS. The album/track/file names are not displayed correctly. , The player can only display numbers and alphabet. Other characters are displayed as "*". "Data error" appears. , The video, photo, and music files you want to play is broken. The player does not operate properly. , When static electricity, etc., causes the player to operate abnormally, unplug the player. The CONTROL FOR HDMI function does not work. , Make sure that the TV's input is switched to the USB media player so that the signal from the player appears on the TV screen, and "CONTROL FOR HDMI" is set to "ON" (page 27). 'BRAVIA Sync' display does not appear. , Please return to the one screen mode if your TV is in two screen mode. Then, try again. 5 numbers or letters are displayed. , The self-diagnosis function was activated. (See the table on page 29.) 28US