Sony SNC-CS10 User Guide - Page 31
Initialize Tab, System log Tab, OK/Cancel, Reboot, Factory default, Backup setting data
UPC - 027242697102
View all Sony SNC-CS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Administrating the Camera OK/Cancel See "Buttons common to every menu" on page 28. Initialize Tab Reboot Reboots the camera. Click Reboot, and the message "This camera will be rebooted. Are you sure?" appears. Click OK to reboot the camera. It takes about 2 minutes to start again. Factory default Resets the camera to the factory settings. Click Factory default, and the message "Set up data will be initialized. Are you sure?" appears. When you click OK, the network indicator on the camera starts to blink. After adjustments of the default settings have finished, the camera reboots automatically. Do not turn off the camera until the camera reboots. Tip The camera can also be reset to the factory settings by turning the power on of this unit while pressing the reset switch on the camera. For details, see the supplied Installation Manual. Backup setting data Saves the setting data of the camera in a file. Click Save, and follow the instructions on the Web browser to specify the folder and save the setting data of the camera. The followings are the file name preset at the factory. SNC-CS10: snc-cs10.cfg SNC-CS11: snc-cs11.cfg Restore setting Loads the stored setting data of the camera. Click Browse and select the file in which the setting data is stored. Then, click OK, and the camera is adjusted according to the loaded data and restarted. Notes • With Restore setting, some items in the Network menu (page 37) cannot be restored. • The following item cannot be stored or restored with Backup setting data or Restore setting. - a homepage created using Custom Homepage Installer Delete user setting URL By pressing Delete, you can delete the home page recorded on the flash memory of the camera with Custom Homepage Installer (page 67). System log Tab System log The data of the software activity of the camera are recorded in this log. It includes data that are useful when a problem occurs. Click Reload to reload the latest data. 31 Configuring the System - System menu