Sony SPP-ID975 Operating Instructions - Page 53
Troubleshooting
View all Sony SPP-ID975 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Troubleshooting If you've experienced any of the following difficulties while using your phone, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Making calls Symptom Remedy You hear five short error beeps when you press (TALK). • Make sure you have set up the base phone correctly (page 8). • Move the handset closer to the base phone. You hear no dial tone. • Make sure the telephone line cord is securely connected to the telephone outlet. • Make sure the battery is fully charged (page 11). The phone does not connect at all, even though the number you dial is correct. • Make sure the dialing mode is set correctly (page 10). The phone does not redial correctly. • Make sure the last dialed number is really the one you want to dial. You hear five short error beeps • The number you last dialed exceeds 32 digits when you try to redial. (including the tone and pause digits if used). • The number you last dialed is erased. You cannot perform the redial operations (redialing, checking and erasing the phone number), and "CHANNEL SEARCHING" appears on the display. • Move the handset closer to the base phone and perform the redial operations again. You cannot hear anything from • Press (VOLUME) (+)on the base phone to increase the the speakerphone. speaker volume. The handset does not ring. • Make sure the ringer is turned on (page 34). • The battery may be weak. Charge the battery for more than 12 hours (page 11). • Make sure you have set up the base phone correctly (page 8). • Move the handset closer to the base phone. The base phone does not ring. • Set the RINGER LEVEL switch on the base phone to HIGH or LOW. • Make sure the telephone line cord is securely connected to the telephone outlet. Receiving calls continued Additional Information Additional Information 53US