Sony SRF-86 Operating Instructions (primary manual) - Page 2
Before attaching to, your hand or arm, Attaching to your
![]() |
View all Sony SRF-86 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
D1 Upper side Mount Lower side Velcro tape E1 2 A side Upper side Lower side F1 B side A side G Lower side Upper side 3 1 Pull 2 4 A side 2 A side B side 2 Pull A side Upper side Lower side H1 2 Upper side 3 A side Lower side I1 2 B side 3 4 A side B side B side B side Before attaching to your hand or arm When you use the unit while doing sports, use the arm band to attach the unit to your hand or arm. Threading the arm band to the mount (See Fig. D) 1 Thread the arm band to the lower side of the mount. The arm band which has Velcro tape must be above. 2 Thread the A side to the upper side of the mount. 3 Attach the A side to the band 1 and pull the band 2 to extend the loop. 4 Attach the B side to the A side. Connecting the mount to the unit (See Fig. E) 1 Connect the mount that is attached the arm band to the knob of the unit. 2 Fasten the shaft using a coin. Adjusting the length of the band (See Fig. F) 1 Detach the B side from the A side. 2 Extend the loop to be able to insert your hand or arm. To adjust more tightly (or loosely) (See Fig. G) Change the position of the A side and reattach to the band. Attaching to your hand (See Fig. H) 1 Put your hand into the loop. 2 Pull the B side. 3 Attach the B side to the A side. Attaching to your arm (See Fig. I) 1 Put your arm into the loop. 2 Pull the B side. 3 Attach the B side to the A side. 4 Rotate the unit.
![](/manual_guide/products/sony-srf86-operating-instructions-primary-manual-4b23acc/2.png)