Sony SRG-A40 Technical Manual - VISCA/CGI COMMAND LIST - Page 67

allow, Parameter, Value, Description, On/Off setting of IPv6 IP Filter function.

Get Sony SRG-A40 PDF manuals and user guides View all Sony SRG-A40 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Parameter V6DosDefenseLimit V6DosDefensePort V6FilterDefaultRule V6FilterFunc V6FilterRule V6SynFloodBurst Set Inq Value Description Set 5 Setting of the number of times to defend Inq 1 to 100 against requests with IPv6 DoS Attack Protection function. Set 80 Setting of the port number to defend Inq 0 to 65535 against requests with IPv6 DoS Attack Protection function. Set allow, reject Setting of the basic policy for IPv6 IP Filter. Inq allow : All the other accesses whose settings are not specified by V6FilterRule parameter will be allowed. reject : All the other accesses whose settings are not specified by V6FilterRule parameter will be denied. Set on, off On/Off setting of IPv6 IP Filter function. Inq Set [Value1] Setting of IPv6 Filter function rules. Inq 0 to 9 Up to 10 rules can be set. [Value2] IPv6 address [Value3] 0 to 128 V6FilterRule=Value11,Value21,Value31, Value41,Value51,Value61,Value12,Value22, Value32,Value42,Value52,Value62[,..., Value110,Value210,Value310,Value410, Value510,Value610] [Value4] tcp, udp, icmp, all [Value5] 0 to 65535 [Value6] allow, reject [Value1] Setting of rule number Smaller value means higher priorities [Value2] Setting of supported network address [Value3] Setting of subnet mask value QoS supports (bit number from the left side of network address) [Value4] Setting of supported protocol tcp : TCP udp : UDP icmp : ICMP In this case, port number (Value5) will be discarded, but it is still necessary. Filter will be applied for all ICMP messages. all : TCP, UDP, ICMP The port number (Value5) designation only works for TCP and UDP. [Value5] Setting of supported port numbers When set to 0, all the Port numbers are supported. [Value6] Setting of policy allow : Specified accesses to the camera will be allowed. reject : Specified accesses to the camera will be denied. Set 3 Setting of continuing numbers of SYN Inq 2 to 60 Packet to be judged as attacks by IPv6 SYN Flood Attack Protection function. 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
67
V6DosDefenseLimit<n>
Set
Inq
5
1 to 100
Setting of the number of times to defend
against requests with IPv6 DoS Attack
Protection function.
V6DosDefensePort<n>
Set
Inq
80
0 to 65535
Setting of the port number to defend
against requests with IPv6 DoS Attack
Protection function.
V6FilterDefaultRule
Set
Inq
allow
, reject
Setting of the basic policy for IPv6 IP Filter.
allow
: All the other accesses whose
settings are not specified by
V6FilterRule parameter will be
allowed.
reject
: All the other accesses whose
settings are not specified by
V6FilterRule parameter will be
denied.
V6FilterFunc
Set
Inq
on,
off
On/Off setting of IPv6 IP Filter function.
V6FilterRule
Set
Inq
[Value1]
0
to 9
[Value2]
IPv6 address
[Value3]
0
to 128
[Value4]
tcp
, udp, icmp, all
[Value5]
0
to 65535
[Value6]
allow
, reject
Setting of IPv6 Filter function rules.
Up to 10 rules can be set.
V6FilterRule=Value11,Value21,Value31,
Value41,Value51,Value61,Value12,Value22,
Value32,Value42,Value52,Value62[,…,
Value110,Value210,Value310,Value410,
Value510,Value610]
[Value1]
Setting of rule number
Smaller value means higher priorities
[Value2]
Setting of supported network address
[Value3]
Setting of subnet mask value QoS supports
(bit number from the left side of network
address)
[Value4]
Setting of supported protocol
tcp
: TCP
udp
: UDP
icmp : ICMP
In this case, port number (Value5) will be
discarded, but it is still necessary. Filter will
be applied for all ICMP messages.
all
: TCP, UDP, ICMP
The port number (Value5) designation only
works for TCP and UDP.
[Value5]
Setting of supported port numbers
When set to 0, all the Port numbers are
supported.
[Value6]
Setting of policy
allow
: Specified accesses to the camera
will be allowed.
reject
: Specified accesses to the camera
will be denied.
V6SynFloodBurst
Set
Inq
3
2 to 60
Setting of continuing numbers of SYN
Packet to be judged as attacks by IPv6 SYN
Flood Attack Protection function.
Parameter
Set
Inq
Value
Description