Sony SRPX700P Product Manual (SRP-X700P Software Operation Manual 1.3) - Page 4
Installation, Installing the Dedicated USB Driver Software - srp x700p usb driver
View all Sony SRPX700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Installation The dedicated USB driver software is necessary to connect the SRP-X700P Manager and User Control Panel to the SRP-X700P. Installing the Dedicated USB Driver Software • The dedicated USB driver software is contained in the CD-ROM supplied with the SRP-X700P. • Install the dedicated USB driver software by following the instructions shown on the screen. Some computer may reboot when the dedicated USB driver software is installed. 1 Turn on the main power of the personal computer and start Windows. 2 Insert the supplied CD-ROM into the CD-ROM drive of the personal computer. 3 Turn on the main power of the SRP-X700P. Connect the connector on the front or rear of the SRP-X700P to the USB connector of the personal computer using a USB cable. 4 The USB device of the SRP-X700P is recognized and the dialog box [This wizard searches for new drivers for:] appears. Click [Next >]. 5 Select [Search for the best driver for your device. (Recommended).] and click [Next >]. (Fig. 1) 0 Select [Search for the best driver for your device. (Recommended).] and click [Next >]. (Fig. 3) Select Click Fig. 3 qa Click on the check box [Specify a location:] and click [Browse...]. Specify [Driver] folder of the supplied CD-ROM and click [Next >]. (Fig. 4) Click on the check box Select Click Fig. 1 6 Click on the check box [Specify a location:] and click [Browse...]. Specify [Driver] folder of the supplied CD-ROM and click [Next >]. (Fig. 2) Click Fig. 4 qs When the screen [Windows driver file search for the device:] appears, click [Next >]. qd When the screen [Windows has finished installing the software that your new hardware device requires.] appears, click [Finish]. Installation of the dedicated USB driver software is now complete. Click on the check box Click Fig. 2 7 When the screen [Windows driver file search for the device:] appears, click [Next >]. 8 When the screen [Windows has finished installing the software that your new hardware device requires.] appears, click [Finish]. 9 Because the USB port of the SRP-X700P is recognized as [Unknown Device], click [Next >]. 4