Sony SRS-X2/BLUE Help Guide (Printable PDF) - Page 65
If the communication condition is poor - bluetooth portable speaker
View all Sony SRS-X2/BLUE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Hint When you set the volume to the maximum or minimum, the (power) indicator flashes three times. To use this speaker at a loud volume, connect it to an AC outlet. Also, make sure that the CHARGE indicator is not flashing. Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the connected device. Note If the communication condition is poor, the BLUETOOTH device may react incorrectly to operations on the speaker. When you connect a portable audio device, etc., to the speaker's AUDIO IN jack while listening to music via BLUETOOTH connection, the speaker turns to AUDIO IN mode automatically. In this case, the sound of the BLUETOOTH device is not output (the BLUETOOTH connection is not terminated). When you listen to the sound from the BLUETOOTH device again, disconnect the portable audio device, etc., from the speaker's AUDIO IN jack. Related Topic Using the BLUETOOTH standby function How to make wireless connection with BLUETOOTH devices Terminating the BLUETOOTH connection (After use) Enjoying the surround effects Notes on use 4 - 540 - 810 - 11(1) Copyright 2014 Sony Corporation 61