Sony SRS-XB501G Help Guide - Page 19

Help Guide Wireless Speaker SRS-XB501G Pairing and connecting with BLUETOOTH® devices When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device. Before operating the speaker, be sure to do the following: Place the BLUETOOTH device within 1 m (3 ft) from the speaker. Connect the speaker to an AC outlet via the AC adaptor (supplied) or charge the built-in battery sufficiently. Stop playback on the BLUETOOTH device. Turn down the volume of the BLUETOOTH device and the speaker to avoid any sudden loud sound output from the speaker. Depending on the paired BLUETOOTH device, the volume of the BLUETOOTH device may be synchronized with the volume of the speaker when you start playing music after a BLUETOOTH connection is established. 1 After the Google Assistant setup is complete, press and hold the (BLUETOOTH) button/ button until the (BLUETOOTH) indicator starts flashing quickly. The speaker is placed in BLUETOOTH pairing mode. PAIRING 2 Perform the pairing procedure on the BLUETOOTH device to detect the speaker. When a list of detected devices appears on the display of the BLUETOOTH device, select the speaker you set up for Google Assistant. If passkey* entry is prompted on the BLUETOOTH device, enter "0000." * A passkey may also be called "Passcode," "PIN code," "PIN number" or "Password." 3 Follow the instructions on the BLUETOOTH device screen to establish a BLUETOOTH connection. When the BLUETOOTH connection is established, the (BLUETOOTH) indicator switches from flashing to a steady light. Hint For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device. 19