Sony SRS-XV500 Help Guide - Page 27

5 Perform the pairing procedure on the BLUETOOTH device to detect the speaker. When a list of detected devices appears on the display of the BLUETOOTH device, select "SRS-XV500." If a passkey* is required on the display of the BLUETOOTH device, enter "0000." * The passkey may be called a "passcode," "PIN code," "PIN number," or "password." 6 Establish a BLUETOOTH connection from the BLUETOOTH device. When a BLUETOOTH connection is established, you hear the notification sound from the speaker and the activity of the (BLUETOOTH) indicator changes from flashing to lit. If the BLUETOOTH connection is not established, repeat from step . Hint As long as the BLUETOOTH function is activated on a BLUETOOTH device that has previously been connected with the speaker, the speaker is reconnected with the device right after the speaker is turned on. The above instructions on the BLUETOOTH device are provided as an example. For details, refer to the operating instructions supplied with the BLUETOOTH device. You can perform operations including establishment and disconnection of BLUETOOTH connections by using "Sony | Music Center." You can connect the speaker concurrently with up to 2 BLUETOOTH devices. (Multipoint connection) Note The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However, when the speaker has no pairing information, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before finishing the process, repeat from step . The passkey of the speaker is "0000." If a passkey besides "0000" is set on the BLUETOOTH device, pairing cannot be done with the speaker. Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases: Pairing information has been deleted after repair, etc. The speaker is already paired with 8 devices and another device is to be paired. 27