Sony SRSZ50/BLK Operating Instructions - Page 1

A Rear Left speaker (front) Right speaker (front)  B Left speaker (rear) C AC power adaptor (supplied) to wall outlet to DC IN 5.2 V jack Right speaker (rear) Left speaker (rear) to LINE OUT or to headphones jack (stereo mini jack) PC, etc. to R OUT jack to INPUT2 jack RK-G136 connecting cord (optional) Portable audio device, etc. English Before operating the system, please read this manual thoroughly and retain it for future reference. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug of AC power adaptor is used to disconnect the AC power adaptor from the mains, connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately. The system is not disconnected from the mains as long as it is connected to the AC outlet, even if the system itself has been turned off. Excessive sound pressure from earphones and headphones can cause hearing loss. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Precautions On safety • Before operating the system, be sure that the operating voltage of the system is identical with that of your local power supply. Where purchased Operating voltage All countries/regions 100 - 240 V AC, 50/60 Hz • Use only the supplied AC power adaptor. On operation • Should any solid object or liquid fall into the system, have the system checked by qualified personnel before operating it any further. • Although this system is magnetically shielded, do not leave recorded tapes, watches, personal credit cards, or floppy disks with magnetic coding in front of the system for an extended period of time. On placement • Do not set the system in an inclined position. • Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock. On cleaning Do not use alcohol, benzine, or thinner to clean the cabinet. If the TV picture or monitor display is magnetically distorted Although this system is magnetically shielded, there may be cases that the picture on some TV sets/personal computer sets may become magnetically distorted. In such a case, turn off the power of the TV set/personal computer set once, and after 15 to 30 minutes turn it on again. For the personal computer set, take the appropriate measures such as data storage before turning it off. When there seems to be no improvement, locate the system further away from the TV set/personal computer set. Furthermore, be sure not to place objects in which magnets are attached or used near the TV set/personal computer set, such as audio racks, TV stands, toys etc. These may cause magnetic distortion to the picture due to their interaction with the system. Others • If you have any questions or problems concerning this system that are not covered in this manual, please consult your nearest Sony dealer. • Should any problem persist, consult your nearest Sony dealer. Identifying parts (See fig. A)  R OUT jack  DC IN 5.2V jack  INPUT2 jack  INPUT1 Connecting cord with stereo-mini plug  Power indicator   (power) button   (headphones) jack  VOLUME control Hooking up the system 1 Connecting the AC power adaptor to the speaker. (See fig. B) Note Use only the supplied AC power adaptor. To avoid possible speaker damage, do not use any other AC power adaptor. Polarity of the plug Notes • Plug the AC power adaptor into a nearby AC output. In the case of a problem, unplug from the AC outlet immediately. • Do not place the AC power adaptor on a bookshelf or in a confined place such as a cabinet. • To avoid fire or electric shock, do not use the AC power adaptor in a place subject to liquid or moisture. Furthermore, do not place liquid-filled vessels, such as a vase, etc., on the AC power adaptor. 2 Connect the left speaker to the source device. (See fig. C) When the system is connected to the monaural jack of the source device The sound may not come through the right speaker. To connect to a stereo phone-type headphones jack Use the optional plug adaptor* PC-234S or optional connecting cord RK-G138. * The above optional accessories are not provided in some areas. Listening to the sound First, turn down the volume on this system. When connecting the system to the headphones output, turn down the volume of the source device. 1 Press the  (power) button ( on). The Power indicator lights up. 2 Start playing on the source device. 3 Adjust the volume. Set the volume of the source device to a moderate level, and turn the VOLUME control on this system. 4 Press the  (power) button ( off) after use. The Power indicator turns off. To use the headphones/earphones Connect them to the i (headphones) jack. Notes • If connecting the speaker to a device with a built-in radio or tuner, radio broadcasting cannot be received or sensitivity may be reduced significantly. • If the source device has a bass boost function or equalizer function, set them to off. If these functions are on, sound may be distorted. • If the source device's headphone output has a line switch, better sound will be heard if it is set to on. See the operating instructions of the source device. • If both the connected device to the INPUT 1 and the one connected to the INPUT 2 are played at the same time, both sounds can be heard. Troubleshooting Should you have a problem with your speaker system, check the following list and take the suggested measures. If the problem persists, consult your nearest Sony dealer. No sound • Check that both this system and the source device are turned on. • Turn up the volume of the system. • Turn up the volume of the source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the device. • Make sure all the connections have been correctly made. • Check if headphones are connected. If they are, disconnect them. Low sound level • Turn up the volume of the source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the device. • Turn up the volume of the system. Distorted sound • Turn down the volume of the source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the device. • If the source device has a bass boost function, set it to off. • Turn down the volume of the system. There is hum or noise in the speaker output. • Make sure all the connections have been correctly made. • Make sure none of the audio devices are positioned too close to the TV set. The brightness of the POWER indicator is unstable. • The brightness of the POWER indicator may become unstable when the volume is turned up. This is not malfunction. Specifications Speaker section Speaker system 38 mm Full range, magnetically shielded Enclosure type Bass reflex Impedance 4 Ω Rated input power 2.5W Maximum input power 5W Amplifier section Rated output Input Input impedance Output 2.5 W + 2.5 W (10 % T.H.D., 1 kHz, 4 Ω) Connecting cord with stereo mini plug (1 m, 39 3/8 in) × 1 12 kΩ (at 1kHz) Stereo mini jack × 1 (PHONES) General Power Dimensions (w/h/d) Mass DC 5.2 V (supplied AC power adaptor) Approx. 58 × 170 × 90 mm (2 3/8 × 6 3/4 × 3 5/8 in.) Approx. 350g (12 oz.) (Left speaker) Approx. 300g (11 oz.) (Right speaker) Supplied accessories AC power adaptor (1) Operating Instructions (1) Optional accessories Connecting cord RK-G136, RK-G138 Plug adaptor PC-234S The above optional accessories are not provided in some areas. Design and specifications are subject to change without notice. This warranty is valid only in the United States. Cette garantie ne s'applique qu'aux États-Unis. Esta garantía sólo es válida en Estados Unidos.