Sony SRW5800/2 Brochure (HDCAM-SR VTR Family Brochure) - Page 9
Playback of Tapes Recorded by SRW-1
View all Sony SRW5800/2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Audio Output Channel Selection The SRW-5800/5500/5000/5100 is equipped with a unique internal audio-output router, which enables flexible audio-output channel routing without the use of an external audio-routing device. Any channel from the 12*1 available on HDCAM-SR tape can be assigned to the embedded HD-SDI (Ch 1-12) and SDI (Ch 1-8) audio-output channels. This feature provides the flexibility needed when recording audio to different tape formats. *1: Four channels on HDCAM/Digital BETACAM tape. Dual-sync Operation A unique feature of the SRW-5800/5500/5000/5100 allows users to seamlessly integrate the VTR into a 59.94 editing environment. In doing so, users can directly perform insert editing - from a 23.98PsF master tape to either a 1080/59.94i or a 525/59.94i recording - without having to first dub the master to 59.94 format. This is achieved by supplying dual reference signals, one to lock the servo of the SRW-5800/5500/5000/5100 to a 23.98-Hz signal and one to lock the playout circuitry to a 59.94-Hz reference signal. Off-speed Playback Capability In order to play back material at different speeds for applications such as slow-motion or fast-motion, the SRW-5800/5500/5000/ 5100 is equipped with a built-in off-speed playback capability. HDCAM-SR Off-speed Playback Capability 4:2:2 mode System Setting HD-SDI OUTPUT 1080 Playback Tape 23.98PsF 24PsF 25PsF 29.97PsF 30PsF 50P 59.94P 60P 50i 59.94i 60i 1080 4:2:2 23.98PsF 10bit 24PsF 25PsF 50i 29.97PsF 59.94i 30PsF 60i 50p 59.94p 60p 720 50p - - - - - - - - 59.94p - - - - - - - - 720 50P 59.94P - - - - - - - - - - - - - - - - 4:4:4 mode System Setting 1920 x 1080 HD-SDI OUTPUT 2048 x 1080 4:4:4 RGB 10bit 4:4:4 XYZ 12bit 4:4:4 RGB 10bit Playback Tape 23.98PsF 24PsF 25PsF 29.97PsF 30PsF 23.98PsF 24PsF 25PsF 23.98PsF 24PsF 25PsF 50i 59.94i 60i 1920 4:4:4 23.98PsF - - - - - - x RGB 24PsF 1080 10bit 25PsF - - - - - - - - - - - - 50i 29.97PsF - - - - - - 59.94i 30PsF - - - - - - 60i 2048 4:4:4 23.98PsF - - - - - - - - x XYZ 24PsF - - - - - 1080 12bit 25PsF - - - - - - - - - - - 4:4:4 23.98PsF - - - - - - - - RGB 24PsF - - - - - - - - 10bit 25PsF - - - - - - - - : Normal playback : 0.1% offspeed playback : Video and Audio off-speed playback : Video off-speed playback : Video off-spped playback with (23.98/24/25/29.97/30 PsF recorded tape only) RGB 4:4:4 HQ mode and RGB 4:4:4 SQ mode are incompatible. SRW-5500/5000 does not support RGB 4:4:4 HQ mode. Playback of Tapes Recorded by SRW-1 The SRW-5800/5500/5000/5100 VTR is capable of playing back tapes recorded by the SRW-1 recorder in the following unique modes: • 3D Stereoscopic (Dual Stream) mode: The SRW-5800/5100 can play back material shot by the SRW-1 in Dual Stream mode. The SRW-5500/5000 can play back either channel A or channel B of the Dual Stream 4:2:2 recording. Users can select the stream to be played back via the menu. • 1080/4:2:2/60p mode: The SRW-5800/5500/5000/5100 can play back a 1080/60p tape in 24p, 25p, and 30p mode, producing the desired slow-motion effect in playback at normal speeds. It is also possible to play 60p recordings in normal speed by playing back every other frame, so only 30 frames in total are played back. The SRW-5800/5100 can also play back in 1080/60p mode, offering smooth pictures for playing back fastmoving scenes. • Select FPS mode: The SRW-5800/5500/5000/5100 can play back a tape recorded with the Select FPS function at 24p, 25p, and 30p mode, both in 4:2:2 and 4:4:4, producing the desired slow- and fast-motion effect in playback at normal speeds. Storage of Setup/System Menus in VTR Memory Banks The SRW-5800/5500/5000/5100 VTR allows operators to effectively manage its menus using VTR memory banks. Up to eight groups of parameters in the System Menu and Setup Menu can be individually saved in the VTR's internal memory as a bank memory. The setup parameters can also be saved onto Memory Stick™ media, enabling these groups of parameters to be copied onto other SRW-5800/5500/5000/5100 VTRs for quick and consistent setup of multiple VTRs*1. The operator can select a suitable name for each bank memory. *1: This capability is not fully supported when exchanging data between different models. Ethernet-based Bank Memory Selection An Ethernet interface is provided on the SRW-5800/5500/5000/ 5100 VTR, enabling operators to remotely set up VTRs using a standard web browser on a PC. The VTR automatically generates SRW.html files that indicate the bank settings currently saved on the VTR. By accessing the VTR via an Ethernet interface, operators can see the parameters in each of the listed bank memories, and select a bank they want to use. 9