Sony SRXT110 Installation Guide (SXRD-install) - Page 21

Network, Mail Report, Date & Time, Time ServerNTP Server, Internet Protocol TCP/IP, Report Timing

Get Sony SRXT110 PDF manuals and user guides View all Sony SRXT110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Chapter 2 Installation and Connections Date & Time Clicking on the date text box displays a calendar. Set the current date using the calendar. To set the current time, click the hour or minute in the time text box and set it by clicking . Time Server(NTP Server) Enter the IP address of the NTP server. Mail Report The Mail Report window is used to set sending e-mail to report the used time of the projection lamps or the operating hours of the projector for maintenance to the preset addresses. Network The Network window is used to configure the network setting for the projector. Internet Protocol (TCP/IP) Sets the IP address of the projector. Click either radio button. Obtain an IP address automatically (DHCP): Click when you obtain an IP address automatically from a DHCP server. Specify an IP address: Click when you specify a fixed IP address. Sets the following items. IP Address: Enter the IP address of the projector. Subnet Mask: Enter the subnet mask. Default Gateway: Enter the default gateway. Primary DNS: Enter the IP address of a primary DNS server. Secondary DNS: Enter the IP address of a secondary DNS server. LAN MAC address: Displays the MAC address of the projector. Speed: Sets the link speed of Ethernet. Select from the drop-down list displayed by clicking . Report Timing Lamp Timer Reminder: Presets the timing when e-mail is sent for reporting the used time of the lamps. Maintenance Reminder: Presets the timing when e-mail is sent for reporting the elapsed operating time of the projector for maintenance. Re-count: Resets the elapsed operating time when you check the check box. Reporting Sources/Destination FROM: Enter the e-mail address from which e-mails are sent. Email Address: Enter the e-mail addresses to which you send e-mails as TO and CC. Reporting Contents Error: Check the addresses to which you want to send e- mail for reporting errors. Lamp Timer/Maintenance: Check the addresses to which you want to send e-mail for reporting "Lamp Timer" and "Maintenance". Mail Server Outgoing Mail Server (SMTP): Enter the SMTP (sending mail) server name or the IP address of the SMTP server. Requires Authentication: If authentication is required when you send e-mails, check the check box and select either way for authentication. POP before SMTP: Selects when "POP before SMTP" is necessary when e-mail is sent. POP3 Server: Enter the POP3 server name or the IP address of the POP3 server. Account Name: Enter the user name to log in to the POP3 server. Password: Enter the password of the user to log in to the POP3 server. 21 Setting the Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
21
Setting the Projector
Chapter 2
Installation and Connections
Date & Time
Clicking
on the date text box displays a calendar. Set
the current date using the calendar.
To set the current time, click the hour or minute in the time
text box and set it by clicking
.
Time Server(NTP Server)
Enter the IP address of the NTP server.
Network
The Network window is used to configure the network
setting for the projector.
Internet Protocol (TCP/IP)
Sets the IP address of the projector.
Click either radio button.
Obtain an IP address automatically (DHCP):
Click
when you obtain an IP address automatically from a
DHCP server.
Specify an IP address:
Click when you specify a fixed IP
address. Sets the following items.
IP Address:
Enter the IP address of the projector.
Subnet Mask:
Enter the subnet mask.
Default Gateway:
Enter the default gateway.
Primary DNS:
Enter the IP address of a primary
DNS server.
Secondary DNS:
Enter the IP address of a secondary
DNS server.
LAN
MAC address:
Displays the MAC address of the
projector.
Speed:
Sets the link speed of Ethernet. Select from the
drop-down list displayed by clicking
.
Mail Report
The Mail Report window is used to set sending e-mail to
report the used time of the projection lamps or the
operating hours of the projector for maintenance to the
preset addresses.
Report Timing
Lamp Timer Reminder:
Presets the timing when e-mail
is sent for reporting the used time of the lamps.
Maintenance Reminder:
Presets the timing when e-mail
is sent for reporting the elapsed operating time of the
projector for maintenance.
Re-count:
Resets the elapsed operating time when you
check the check box.
Reporting Sources/Destination
FROM:
Enter the e-mail address from which e-mails are
sent.
Email Address:
Enter the e-mail addresses to which you
send e-mails as TO and CC.
Reporting Contents
Error:
Check the addresses to which you want to send e-
mail for reporting errors.
Lamp Timer/Maintenance:
Check the addresses to
which you want to send e-mail for reporting “Lamp
Timer” and “Maintenance”.
Mail Server
Outgoing Mail Server (SMTP):
Enter the SMTP
(sending mail) server name or the IP address of the
SMTP server.
Requires Authentication:
If authentication is required
when you send e-mails, check the check box and
select either way for authentication.
POP before SMTP:
Selects when “POP before
SMTP” is necessary when e-mail is sent.
POP3 Server:
Enter the POP3 server name or the
IP address of the POP3 server.
Account Name:
Enter the user name to log in to
the POP3 server.
Password:
Enter the password of the user to log in
to the POP3 server.