Sony STR-DA1ES Operating Instructions - Page 20

4: Connecting the AC power cord AC OUTLET* FRONT SURROUND CENTER OUT L R PRE OUT SUB WOOFER 4 Ω 8 Ω IMPEDANCE SELECTOR AC OUTLET b To a wall outlet AC power cord * Models of area code U, CA, SP, TW only. The configuration, shape, and number of AC outlets vary according to the model and country to which the receiver is shipped. Notes • The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on. • Make sure that the total power consumption of the component(s) connected to the receiver's AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. This may cause a malfunction. Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. "INITIAL" appears in the display. The following are reset to their factory settings. • All settings in the SET UP, CUSTOMIZE, SURROUND, LEVEL, and EQ menus. • The sound field memorized for each function and preset station. • All preset stations. • All index names for functions and preset stations. 20GB