Sony STR-DE545 Operating Instructions (Receiver) - Page 15

Performing Initial Setup Operations - 2 reset

Page 15 highlights

Hooking Up and Setting Up the Speaker System Performing Initial Setup Operations Once you have hooked up the speakers and turned on the power, clear the receiver's memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system. Before turning on the receiver Make sure that you have: • Selected the appropriate front speakers (see "7 SPEAKERS selector" on page 23). (STR-DE545 and STR-SE501 only). Clearing the receiver's memory Before you use your receiver for the first time or when you want to clear the receiver's memory, do the following. This procedure is not necessary if the demonstration activates when you turn the power on. 1/u ? / 1 SPEAKERS R ON r OFF A B PHONES MULTI CHANNEL DECODING DIMMER DISPLAY INPUT MODE VIDEO DVD/LD TV/SAT 5.1CH INPUT MD/TAPE CD TUNER AUX CINEMA STUDIO A B C SOUND FIELD A. F. D. 2CH MODE I - LEVEL SUR BASS/ TREBLE i + SET UP NAME ENTER BASS BOOST TONE MASTER VOLUME PRESET - TUNING + SHIFT - TUNING + MEMORY FM/AM FM MODE MUTING BASS BOOST TONE Performing initial setup operations Before you use your receiver for the first time, use the SET UP button to adjust settings to correspond to your system. You can set the following items. For details on how to adjust each setting, see the page in parentheses. • Speaker size and placement (page 16). • Speaker distance (page 18). • The video signal paired with the 5.1CH INPUT (page 44). 1 Turn off the receiver. 2 Hold down ?/1 for four seconds. The currently selected function, then the demonstration message appears in the display and the items including the following are reset or cleared: • All preset stations are reset or cleared. • All sound field parameters are reset to their factory settings. • All index names (of preset stations and program sources) are cleared. • All adjustments made with the SET UP button are reset to their factory settings. • The sound field memorized for each program source and preset stations are cleared. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

15
Hooking Up and Setting Up the Speaker System
Performing Initial Setup Operations
Once you have hooked up the speakers and turned on the
power, clear the receiver
s memory. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.
Before turning on the receiver
Make sure that you have:
Selected the appropriate front speakers (see
7
SPEAKERS selector
on page 23). (STR-DE545 and
STR-SE501 only).
Clearing the receiver
s memory
Before you use your receiver for the first time or when
you want to clear the receiver
s memory, do the following.
This procedure is not necessary if the demonstration
activates when you turn the power on.
1
Turn off the receiver.
2
Hold down
?
/
1
for four seconds.
The currently selected function, then the
demonstration message appears in the display and the
items including the following are reset or cleared:
All preset stations are reset or cleared.
All sound field parameters are reset to their factory
settings.
All index names (of preset stations and program
sources) are cleared.
All adjustments made with the SET UP button are
reset to their factory settings.
The sound field memorized for each program source
and preset stations are cleared.
Performing initial setup operations
Before you use your receiver for the first time, use the SET
UP button to adjust settings to correspond to your system.
You can set the following items. For details on how to
adjust each setting, see the page in parentheses.
Speaker size and placement (page 16).
Speaker distance (page 18).
The video signal paired with the 5.1CH INPUT (page
44).
1/u
MULTI CHANNEL DECODING
MASTER VOLUME
DISPLAY
INPUT MODE
VIDEO
MD/TAPE
CD
TUNER
AUX
DVD/LD
TV/SAT
5.1CH INPUT
CINEMA STUDIO
LEVEL
I
i
+
SET UP
BASS BOOST
TONE
FM/AM
MUTING
TONE
BASS
BOOST
SHIFT
MEMORY
FM MODE
PRESET
TUNING
+
TUNING
+
NAME
ENTER
SUR
BASS/
TREBLE
SOUND FIELD
A. F. D.
A
B
C
2CH
MODE
DIMMER
SPEAKERS
R
ON
r
OFF
A
PHONES
B
?
/
1