Sony STR-DE585 Operating Instructions - Page 52

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 40 - 20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.09 % total harmonic distortion from 250 milliwatts to rated output (STR-DE485 area code U only). Amplifier section POWER OUTPUT Models of area code U, CA Rated Power Output at Stereo Mode (8 ohms 40 Hz - 20 kHz, THD 0.09 %) STR-DE585*: 100 W + 100 W STR-DE485: 80 W + 80 W Reference Power Output (8 ohms 1 kHz, THD 0.7 %) STR-DE585*: FRONT1):100 W/ch CENTER1): 100 W SURR1): 100 W/ch STR-DE485: FRONT1): 80 W/ch CENTER1): 80 W SURR1): 80 W/ch * Models of area code CA only. Models of area code CEL,CEK Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %) STR-DE585: 100 W + 100 W2) STR-DE485E: 80 W + 80 W2) Reference Power Output2) (8 ohms 1 kHz, THD 0.7 %) STR-DE585: FRONT1):100 W/ch CENTER1): 100 W SURR1): 100 W/ch STR-DE485E: FRONT1): 80 W/ch CENTER1): 80 W SURR1): 80 W/ch Models of other area code Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %) STR-DE485: 80 W + 80 W2) Reference Power Output2) (8 ohms 1 kHz, THD 10 %) STR-DE485: FRONT1): 100 W/ch CENTER1): 100 W SURR1): 100 W/ch 52GB 1) Depending on the sound field settings and the source, there may be no sound output. 2) Measured under the following conditions: Area code Power requirements E2/E3, AU 240 V AC, 50 Hz SP, CEL, CEK, AR 230 V AC, 50 Hz TW 110 V AC, 60 Hz MX 120 V AC, 60 Hz Frequency response MULTI CH IN (STR-DE 585 and STR-DE485 only), CD, MD/TAPE, DVD/ LD, VIDEO 1, 2 10 Hz - 50 kHz +0.5/-2 dB (with sound field, and tone bypassed) Inputs (Analog) MULTI CH IN (STR-DE 585 and STR-DE485 only), CD, MD/TAPE, DVD/ LD, VIDEO 1, 2 Sensitivity: 250 mV Impedance: 50 kilohms S/N3): 96 dB (A, 250 mV4)) 3) INPUT SHORT (with sound field and tone bypassed). 4) Weighted network, input level. Inputs (Digital) DVD/LD (Coaxial) VIDEO 2 (Optical) Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) Outputs MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Voltage: 250 mV Impedance: 10 kilohms Voltage: 2 V Impedance: 1 kilohms Tone Gain levels: ±6 dB, 1 dB step FM tuner section Tuning range 87.5 - 108.0 MHz Antenna terminals 75 ohms, unbalanced Intermediate Frequency 10.7 MHz