Sony STR-DE698/B Operating Instructions - Page 19
SP. PAT. X -X Speaker setup pattern, S.W. XXX Sub woofer selection, X Front speakers size
View all Sony STR-DE698/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started x SP. PAT. X -X (Speaker setup pattern) When you select "EASY SET", select the speaker setup pattern. Turn the -/+ jog dial to select the speaker setup pattern and press ENTER to enter the selection. Check your speaker pattern using the supplied "Easy Setup Guide". x SW S.W. XXX (Sub woofer selection) • YES If you connect a sub woofer, select "YES". • NO If you did not connect a sub woofer, select "NO". The front speakers are automatically set to "LARGE" and you cannot change this setting. This activates the bass redirection circuitry and outputs the LFE signals from other speakers. • In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend that you set the cut off frequency on the sub woofer as high as possible. x L R XXXXX (Front speakers size) • LARGE If you connect large speakers that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". • SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to "SMALL", the center, surround and surround back speakers are also automatically set to "SMALL" (unless previously set to "NO"). x C XXXXX (Center speaker size) • LARGE If you connect a large speaker that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However, if the front speakers are set to "SMALL", you cannot set the center speaker to "LARGE". • SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to "LARGE") or sub woofer.a) • NO If you did not connect a center speaker, select "NO". The sound of the center channel will be output from the front speakers.b) x SL SR XXXXX (Surround speakers size) • LARGE If you connect large speakers that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However, if the front speakers are set to "SMALL", you cannot set the surround speakers to "LARGE". • SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the surround channel bass frequencies from the sub woofer or other "LARGE" speakers. • NO If you did not connect surround speakers, select "NO".c) continued 19GB