Sony STR-DE897/B Operating Instructions - Page 26
About the indications in the display
View all Sony STR-DE897/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
About the indications in the display 12 3 4 56 7 8 9 q; qa SP.A SP.B MULTI CH IN 1 2 EQ D.RANGE ;DIGITAL EX DTS-ES SW LFE SLEEP A.DIRECT ;PRO LOGIC II 96/24 NEO:6 LCR SL S SR qh qg SBL SB SBR qf qd qj OPT COAX MONO MEMORY D.ASSIGN STEREO qs A SW: Lights up when sub woofer selection is set to "YES" (page 18) and the audio signal is output from the SUB WOOFER jacks. B LFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. C SP.A/SP.B: Lights up in accordance with the speaker system being used (A or B). Turns off when speaker output is turned off or when headphones are connected. D MULTI CH IN 1 or 2: Lights up when "MULTI 1 DIRECT" or "MULTI 2 DIRECT" is selected. E EQ: Lights up when the equalizer functions. F D.RANGE: Lights up when dynamic range compression is activated (page 36). G ; DIGITAL EX: "; DIGITAL" lights up when the receiver is decoding signals recorded in the Dolby Digital format. "; DIGITAL EX" lights up when the receiver is decoding signals recorded in the Dolby Digital EX format. H DTS-ES 96/24: "DTS" lights up when DTS signals are input. "DTS-ES" lights up when DTS-ES signals are input. "DTS 96/24" lights up when the receiver is decoding DTS 96 kHz/ 24 bit signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG FIXED" (page 35). I OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal or when INPUT MODE is set to "OPT FIXED" (page 35). J COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal or when INPUT MODE is set to "COAX FIXED" (page 35). K Tuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 23-25 for tuner operations. L D.ASSIGN: Lights up when the digital assign function is used for the selected input. M NEO:6: Lights up when DTS Neo:6 Cinema/ Music mode decoding is activated. However, this indicator does not light up if both the center and surround speakers are set to "NO". N ; PRO LOGIC II: "; PRO LOGIC" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PRO LOGIC II" lights up when the Pro Logic II Movie/Music decoder is activated. However, both indicators do not light up if both the center and surround speakers are set to "NO" and "A.F.D. AUTO", "PRO LOGIC", "PLII MOVIE" or "PLII MUSIC" is selected. Note Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals. O A.DIRECT: Lights up when you select ANALOG DIRECT. 26GB