Sony SU-PW1 Instructions (primary manual) - Page 7
Step 1: Check the parts required for the installation
View all Sony SU-PW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Be sure to install the Display Unit on a wall that is both perpendicular and flat. If you fail to do so, the Display Unit may fall and cause injury. After proper installation of the Display Unit, secure the cables properly. If people or objects get tangled in the cables, this may result in injury. Be careful not to hurt your hands or fingers during the installation. Be careful not to hurt your hands or fingers when installing the Wall-Mount Bracket or the Display Unit. The screws needed to secure the Wall-Mount Bracket to the wall are not supplied. Use the appropriate screws for the wall material and structure when mounting the Wall-Mount Bracket. Step 1: Check the parts required for the installation 1 Prepare a Phillips driver and the appropriate screws (eight or more M8 or the equivalent screws, not supplied), depending on the material of the wall, beforehand. 2 Open the package and check the parts. Screws (+PSW5 × 12) (2) Plate Unit (1) Mounting Hook Unit (2) 7 (US)