Sony SU-PW1 SUPW1 Wall Mount Supplement - Page 2

Supplementary instructions for installing an LCD Color TV 2 During installation, follow the supplementary instructions given below, as well as those in the supplied Instructions, to ensure proper installation. Attaching the plate unit to the wall (supplementary instruction for step 3) When attaching an LCD Color TV display, the dimensions given in the diagram below are those required for proper installation. Referring to "Step 3: Install the Plate Unit on the wall" on page 8 (US) of the Instructions and the diagram below, decide on the location where the unit is to be installed. C 530 (20 7⁄8) 140 (5 1⁄2) 35 (1 3⁄8) 400 (15 3⁄4) B 110 110 110 (4 11⁄32) (4 11⁄32) (4 11⁄32) D 330 (13) E 35 (1 3⁄8) F 600 (23 5⁄8) A KLV30XBR900 Unit: mm (inches) A B C D E F 972 525 102 155 175 93 (38 9⁄32) (20 21⁄32) (4 1⁄32) (6 3⁄32) (6 7⁄8) (3 21⁄32) 3 Attaching the KLV30XBR900 to the Wall-Mount Bracket (supplementary instruction for step 4) Perform the procedures outlined below to remove the display from the supplied stand before performing "Step 4: Install the Display Unit" on page 11 (US) of the Instructions. 1 Remove the two fixing screws at the bottom of the plate as shown in the diagram. Save the screws for use later. 4 While one person holds the stand down firmly, two people should lift the display straight up to disengage the hooks (at four places) from the vertical plate of the stand. Note If the stand isn't held down while the display is being lifted, the stand will be raised along with the display, and this can be dangerous. Remove the two fixing screws from the two lower holes near the upper portion of the Mounting Hook Unit, and then re-insert and tighten them in the two upper holes as shown in the diagram. Following the instructions given in "Step 4: Install the Display Unit" on page 11 (US) of the Instructions, attach the display to the Wall-Mount Bracket.