Sony SWF-BR100 Operating Instructions - Page 18
Specifications - settings
View all Sony SWF-BR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ˎˎStays lit in red: --Check the location of the subwoofer. --Do not place the TV and subwoofer in a metal cabinet. --Place the subwoofer close to the TV in a room. --Make sure that the wireless transceiver is inserted correctly into the TV. --Please confirm that power setting of Wireless Subwoofer of TV is Auto. ˎˎFlashes in green or amber slowly or turns red: --Make the Secure Link setting again. --Sound transmission is poor. Move the subwoofer so that the power indicator turns green or amber. ˎˎFlashes in red: --Press power to turn off the subwoofer, and check that nothing is blocking the ventilation slit of the subwoofer. A protection function may act by excessive input. Please lower TV volume or the SW level. Noise is heard from the subwoofer or sound from the subwoofer is intermittent. ˎˎMove the subwoofer closer to the TV. ˎˎDo not install the TV and subwoofer in a closed rack, on a metal rack, or under a table. ˎˎMove the subwoofer away from other wireless devices. ˎˎAvoid using any other wireless devices. The sound output from the subwoofer is very low. ˎˎCheck the subwoofer level in the sound setting of the TV. ˎˎWith some types of content such as news there will not be a lot of bass sound, this is normal. Specifications Wireless Subwoofer (SWF-BR100) Amplifier section For U.S.A model: (FTC) With 4 ohms load, subwoofer channel driven, from 30 - 150 Hz; rated 45 W per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. POWER OUTPUT (reference) 100 W (per channel at 4 ohms, 100 Hz) For Canadian and Mexican model: POWER OUTPUT (rated) 70 W (4 ohms, 100 Hz, 1% THD) POWER OUTPUT (reference) 100 W (4 ohms, 100 Hz) Speaker System Subwoofer, sealed enclosure Speaker Unit 200 mm cone type Rated impedance 4 ohms Power requirements 120 V AC, 60 Hz Power consumption On: 30W Standby mode: 0.5W or less Dimensions (approx.) (w/h/d) 272 mm x 305 mm x 395 mm 10 3/4 in x 12 1/8 in x 15 5/8 in Mass (approx.) 12.2kg 26 lb 14 3/10 oz US 8