Sony TA-AV531 Operating Instructions - Page 6
System
View all Sony TA-AV531 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
' Hooking Up he System 0 AM antenna To attach to a wall lb. AM loop antenna (supplied) For better AM reception Extend a 6 to 15-meter insulated wire out of doors. O SYSTEM CONTROL Connection Connect each SYSTEM CONTROL jack of the amplifier and tuner cord with the SYSTEM CONTROL cord (supplied) for controlling the unit. SYSTEM CONTROL cord (supplied) Push in until it clicks. To disconnect, pull out while pressing the both sides of levers. It is alsiinecessary to connect the supplied AM loop antenna. 0 Connecting Speakers ,•o•••v-•a O Front Front speaker (R speaker (L) e o ls".1 Lta_l 5 VO CID Juu TA-AV531 wt.0* 01.. • • Center speaker rewi . Rear Rear speaker (R) speaker (L) Front speakers Connect the front speaker systems to the FRONT SPEAKER terminals. Rear speakers Connect the rear speaker systems to the REAR SPEAKER terminal for enjoying surround sound. Center speaker You can connect a center speaker to the CENTER SPEAKER terminal for enjoying surround sound. The sound such as a dialog comes from the center. Note on speaker impedance and power capacity This amplifier is designed to work best with speakers of nominal impedance from 8 to 16 ohms (Center speaker: from 4 to 16 ohms). Be sure to use a speaker system with adequate power handling capability. Note When connecting the speaker cord to the speaker terminal, make sure that the polarity (+ and -) of the speaker cord is correct. If the polarity is reversed at either speaker, the sound will be distorted and will lack bass.