Sony TRV230 Operating Instructions - Page 67
Confirming VCR operation, When the VCR does not operate correctly
UPC - 027242584761
View all Sony TRV230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Editing Dubbing only desired scenes - Digital program editing (4) Confirming VCR operation 1 Insert a recordable tape into the VCR, then set to recording pause. 2 Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial. 3 Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. If the VCR starts recording, the setting is correct. When finished, the indicator on the screen changes to COMPLETE. 2 OTHERS ED I T SET CONTROL ADJ TEST " CUT- I N " " CUT-OUT " I R SETUP P AUS EMODE I R TEST RETURN RETURN EXECUTE [ MENU ] : END 3 OTHERS ED I T SET CONTROL ADJ TEST " CUT- I N " " CUT-OUT " I R SETUP P AUS EMODE I R T E S T COMP L E T E RETURN [ MENU ] : END When the VCR does not operate correctly •After checking the code in "About the IR SETUP code", set the IR SETUP or the PAUSEMODE again. •Place your camcorder at least 30 cm (11 7/8 in.) away from the VCR. • Refer to the operating instructions of your VCR. 67