Sony TRV80 Operating Instructions - Page 93
Adding an audio sound on the recorded tape, Audio dubbing, Using the touch panel
UPC - 027242622111
View all Sony TRV80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Editing Audio dubbing Adding an audio sound on the recorded tape Choose a connection mentioned on page 91, and connect audio equipment or microphone to your camcorder. Then follow the procedure below using the touch panel or the Remote Commander supplied with your camcorder. Using the touch panel The POWER switch should be set to . Operate by touching the panel. (1) Insert the recorded tape into your camcorder. (2) Locate the recording start point. Press to start playing back. To pause playing back, press at the recording start point. You can fine-adjust the recording start point by pressing / . (3) Press FN and select PAGE3. (4) Press A DUB CTRL. The A DUB CTRL screen appears. A DUB CTRL RET. AUDIO DUB (5) Press AUDIO DUB. The green X indicator appears on the screen. (6) Press on your camcorder and at the same time start playing back the audio you want to record. The new sound is recorded in stereo 2 (ST2) during playback. While recording new sound, the red indicator appears on the screen. (7) Press on your camcorder at the point where you want to stop recording. Using the Remote Commander The POWER switch should be set to . (1) Follow the step 1 and 2 in "Using the touch panel." (2) Press AUDIO DUB on the Remote Commander. The green X indicator appears on the screen. (3) Press X on the Remote Commander and at the same time start playing back the audio you want to record. The new sound is recorded in stereo 2 (ST2) during playback. While recording new sound, the red indicator appears on the screen. (4) Press x on the Remote Commander at the point where you want to stop recording. N X AUDIO DUB x 93