Sony VGC-RA825GY VAIO User Guide - Page 95
Using the RAID Configuration Wizard, Custom Recovery for Advanced Users
View all Sony VGC-RA825GY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Using the RAID Configuration Wizard The RAID Configuration Wizard can configure two installed hard disk drives for RAID-0 or RAID-1 levels. You can also use the RAID Configuration Wizard to change your computer's RAID array to RAID-0 or RAID-1. 1. Press the power switch on the computer to turn on the computer. 2. Open the optical drive, and place the Startup Recovery Disc from the Recovery Media Kit into either optical drive. 3. Close the drive and turn off your computer. 4. Wait approximately 30 seconds, and then turn on the computer again. 5. When prompted, insert Recovery Disk 1 into the optical drive, and then click OK. The VAIO Recovery Wizard appears. 6. Click Next. 7. Select Custom Recovery (for Advanced Users), and click Next. 8. Select RAID Configuration, and click Next. The RAID Configuration Wizard appears. RAID Configuration Wizard 9. Click Next. The RAID Configuration Options window appears. RAID Configuration Options Page 95