Sony VGF-CP1U Operating Instructions - Page 53
ENTER on the remote control., Confirm that Configuring the access point completed is displayed.
View all Sony VGF-CP1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Screen of this unit "Communicating AOSS information with the access point..." appears. Note An access point with a concealed setting may not be detected. In this case, select "Enter manually" in step 6, and follow the on-screen instructions. The AOSS setting will be canceled automatically if the access point cannot be found within 2 minutes of initiating reception. Cancellation of the process may take about 1 minute, depending on the network status. In this case, wait a moment. 8 Confirm that "Configuring the access point completed" is displayed. 9 Press (ENTER) on the remote control. The setting screen for Proxy appears. 10 If a Proxy setting is unnecessary, press on the remote control to proceed to the next step. The connection name is displayed. Hint If Proxy setting is necessary, press (ENTER) on the remote control and select "Use" by pressing , and press (ENTER). Then set the address and port number of the Proxy server. For home use, Proxy setting is usually unnecessary. If Proxy setting is required, consult the administrator of the home network or your Internet service provider. 53