Sony VGN-CS385J System Reference Manual - Page 84
PCI Configuration Status and Error Messages
UPC - 027242771178
View all Sony VGN-CS385J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
70 VAIO Digital Studio System Reference Manual PCI Configuration Status and Error Messages The following is a list of status and error messages that may appear on your system from time to time. Message Floppy Disk Controller Resource Conflict NVRAM Checksum Error, NVRAM Cleared NVRAM Cleared By Jumper NVRAM Data Invalid, NVRAM Cleared Parallel Port Resource Conflict PCI Error Log is Full PCI I/O Port Conflict PCI IRQ Conflict PCI Memory Conflict Primary Boot Device Not Found Primary IDE Controller Resource Conflict Primary Input Device Not Found Primary Output Device Not Found Meaning The floppy disk controller has requested a resource that is already in use. The NVRAM data was reinitialized due to an NVRAM checksum error. The Clear CMOS jumper block has been changed to the clear position. Invalid entry in the NVRAM. The parallel port has requested a resource that is already in use. This message is displayed when more than 15 PCI conflict errors are detected. No additional PCI errors can be logged. Two devices requested the same resource, resulting in a conflict. Two devices requested the same resource, resulting in a conflict. Two devices requested the same resource, resulting in a conflict. The designated primary boot device (hard disk drive, floppy disk drive, CD-ROM drive, or network drive) could not be found. The primary IDE controller has requested a resource that is already in use. The designated primary input device (keyboard, mouse, or other, if input is redirected) could not be found. The designated primary output device (display, serial port, or other, if input is redirected) could not be found.