Sony VGN-NW150J User Guide - Page 101
Tighten the screw on the bottom of the computer., Replace the memory module compartment cover. - motherboard
UPC - 027242773578
View all Sony VGN-NW150J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Upgrading Your VAIO Computer > Adding and Removing Memory 7 Remove the new memory module from its packaging. 8 Slide the memory module into the memory module slot and push it in until it clicks into place. n 101 N ! Do not touch any other components on the motherboard. If you want to install only one memory module, be sure to use the lower slot. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module. 9 Replace the memory module compartment cover. 10 Tighten the screw on the bottom of the computer. 11 Reinstall the battery pack and turn on the computer.