Sony VGN-NW350F Help - Hard Disk Drive Replacement Instructions - Page 3

VGN-NW Series Hard Disk Drive Replacement Instructions NOTE! Proper mounting of HDD bracket can be verified with the HDD connectors appearing below plastic pull tab. Step 13. Re-install the (4) previously removed screws to properly mount the HDD bracket to the HDD. (HDD Reinstallation) Steps 14-18 Step 14. Insert the (2) left tabs of the new HDD assembly into the (2) slots in the HDD bay. Hold the HDD on the sides to avoid damaging the part. Step 15. Attach the HDD assembly to the HDD connector by sliding the assembly to the right. Make sure the screw holes are aligned correctly. Step 16. Re-install the three (2) screws holding the HDD assembly in place. Step 17. Re-attach the HDD access cover by sliding it in the direction shown in the picture. Step 18. Re-install the HDD cover and secure it with the two (2) screws previously removed. Step 19. Reinstall the battery pack and reconnect the AC Adaptor. Power on your computer and continue with the recovery process by following the instructions described on the back of the recovery disk's case. Return the old HDD to Sony following the included shipping instructions. P/N 989200137 Rev. B 3/3