Sony VPCL212FX VPCL1 Series Optical Disk Drive Replacement Instructions - Page 1

VPCL1 Series Optical Disk Drive Replacement Instructions IMPORTANT! PLEASE READ BEFORE YOU START These easy instructions are intended to guide you through the replacement process. To avoid electric shock, please make sure product is turned off and the AC plug is disconnected from the power source. Remove jewelry before you begin work to avoid scratching the surface of your computer.* Place your computer on a clean, stable and covered surface to avoid damage to the computer's case.* Follow the ESD (Electrostatic Discharge) damage prevention instructions: o Hold parts by the edges, away from exposed circuitry when possible. o Do not walk around excessively as this promotes static build-up. The appearance of the electronic components shown in the illustrations may be different from the components shipped. This slight difference does not affect the accuracy of these instructions. * Sony is not responsible for any loss of data associated with your computer or any damage caused by incorrect handling of the computer under these procedures. The terms of your Sony limited warranty continue to apply. Step 1. Prepare the Computer. CAUTION: Make sure the computer is turned off, and the AC plug is disconnected. Failure to do so can result in damage to the computer. Place the computer standing up on a protected surface with the back portion facing you. Carefully lay computer down. LCD face down. Preferably on a towel to help protect LCD. Step 2. Rotate computer so the ODD Bay is facing you. P/N 989200673 Rev. A 1/4